-phase line filters fss www.schurter.com/pg06_ emc products ac filter 2-stage, very high symmetrical attenuation description - chassis: screw-on mounting, from top - line-filter in standard version, 2 positions, very high attenuation, broad - band - quick connect terminals 6.3 x 0.8 mm or screw terminals - especially effective against symmetrical interferences in the frequency range from 10khz up to 30mhz approvals - vde license number: 40004673 - ul license number: e72928 characteristics - designed for increased requirements - 2-stage line filter with increased attenuation protection against interference voltage from the mains possible interferences generated in the equipment are strongly attenu - ated - especially suitable for use in switching power supplies e.g. in electronic designs with high repetitive switching frequency - qualified for use in equipment according iec/en 60950 references general product informatio n weblinks approval s , roh s , china-roh s , mating connector s , e-stor e , distributor-stock-chec k , accessorie s technical data ratings iec 1 - 16 a @ ta 40 c / 250 vac; 50 hz ratings ul/csa 1 - 16 a @ ta 40 c / 125 vac; 60 hz leakage current industrial < 1.4 ma (250 v / 60 hz) dielectric strength > 1.7 kvdc between l-n > 2.7 kvdc between l/n-pe test voltage (2 sec) allowable operation temp. -25 c to 100 c climatic category 25/100/21 acc. to iec 60068-1 protection class suitable for appliances with protection class 1 acc. to iec 61140 terminal quick connect terminals 6.3 x 0.8 mm or screw terminals material: housing alu. anodised line filter standard and industrial version, iec 60939, iec 60601-1, ul 1283, ul 544, en 133 200, csa c22.2 no. 8 technical detail s mtbf > 200'000 h acc. to mil-hb-217 f
-phase line filters fss www.schurter.com/pg06_ emc products dimensions case 10 max. 81 max. 56 max. 57 3.8 48 0.3 1) 2) 6.3x0.8 0.2 (20) max. 33 (11.5) (26.5) max. 41 1) line 2) load case 19 max. 112 max. 115 max. 87 max. 53 101 0.8 5.3x8.8 1) 2) (36) max. 49 (23) (12) (27) 1) line 2) load case 27 max. 173 max. 56 max. 151 (5) 85 0.3 6.5 0.3 111.5 max. 101 0.5 max. 127 1) 2) 4 mm2 1) line 2) load case 48 75 0.3 91 max. 66 max. 51 max. (20) 6.3x0.8 (3.5) 43 max. (12) (27) 5.3 1) 2) 1) line 2) load diagrams standard version 1) line 2) load attenuation loss - - - - differential mode _____ common mode standard version 1 a 2 a 3 a
-phase line filters fss www.schurter.com/pg06_ emc products industrial version 4 a 6 a 10 a 16 a rated current [a] filter-type leakage cur - rent [ma] l [mh] l [mh] l [mh] cx [ f] cx [ f] cy [nf] cy [nf] r [m ? ] weight [g] housing order number 1 standard version 0.25 2 x 15 1 - 0.1 0.47 1.5 1 1 121 10 5500.2051 2 standard version 0.25 2 x 10 0.4 0.4 0.1 0.47 1.5 1 1 121 10 5500.2052 3 standard version 0.25 2 x 12 1 - 0.1 0.68 1.5 1 1 275 48 5500.2053 4 industrial version 1.4 2 x 10 0.8 - 0.1 0.68 10 4.7 1 275 48 5500.2054 6 industrial version 1.4 2 x 6 0.5 - 0.1 0.68 10 4.7 1 284 48 5500.2055 10 industrial version 1.4 2 x 5 0.2 0.2 0.1 1 10 4.7 1 529 19 5500.2056 16 industrial version 1.4 2 x 4 0.2 0.2 0.47 2.2 10 4.7 1 2000 27 5500.2057 packaging unit 10 pcs the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|
